Projected Capacitive
Touch Screen

Projected capacitive touch screens are commonly used for smartphones and tablet PCs. If you have a smartphone, you know how comfortable its light-touch operation is in such operations as flicking and zooming. DMC has such projected capacitive touch screens in medium- and large-sizes ready for industrial use. It makes it possible to perform more accurate multi-touch operations and broaden the operational range. Furthermore, the projected capacitive type is the most popular touch screen not only because of its operability, but also its excellent durability, toughness, appearance and design.


  • Operation principle

    Electrodes are formed in matrix state, neighboring electrodes are coupled capacitively. As any conductive substance, such as a finger, comes close to the electrodes, capacitive coupling occurs. The screen detects the area whose capacitive coupling value changes as the location of a touch.

    Application model
  • Glass/ Glass Type (Characteristics)

    Features double-layer glass and a capacitive touch screen that applies ITO as electrodes. Glass ensures highly transparent and clear visibility. Glass is excellent in durability and weather resistance, which makes this touch screen ideal for a long-term use.

    Application model
  • Glass/ Glass Type (Drawing of Structure)

    The X and Y electrodes are coated and placed on the opposite side of a glass sheet, and glass is attached in such a way that electrodes are facing each other. Complete attachment of glass ensures highly transparent and clear visibility, and realizes high-durability.

    Application model
  • Film/ Film Type (Characteristics)

    Features double-layer Films and a capacitive touch screen that applies ITO as electrodes. Thin and lightweight compared to glass structure, ideal for carrying or handy equipment.

    Application model
  • Film/ Film Type (Drawing of Structure)

    The X or Y electrodes are coated on one side of each film sheet, and each electrode is bonded to the touch surface. Thin and functional ITO film achieves clear visibility as if using ITO glass.

    Application model


DUS-A | Advanced Model

Advanced model of Projected Capacitive Touch Screen
Thinning Ag wiring and sub-symmetry design of frame shape realized easier LCD bonding and casing design.
Less visible electrode pattern is a standard specification. It could realize beautiful appearance even on low brightness display.
A wide ranging product lineup from 7W to 32 in. is available for different applications.
Capacitive-type Projected-type Multi-touch ITO type Two-layer glass structure Gloved-hand operations Small-size Medium-size Large-size

DUS-V | COF/Cover-Glass Model

Film/ Film Projected Capacitive Touch Screen with COF and Cover-Glass Model
ITO Film/Film structure sensor is thin and lightweight.
Controller is integrated by Chip on Flexible (COF) structure.
Controller Host interface USB /I2C.
Other coverglass spec: Thickness 1.1mm/ Surface treatment: Clear.
Capacitive-type Projected-type Multi-touch ITO type Two-layer Film structure Small-size


Glass/ Glass Projected Capacitive Touch Screen
EETI controller available. (Not saled by DMC)
Thin Glass/Glass structure (≧15" only )
Capacitive-type Projected-type Multi-touch ITO type EETI controller Two-layer Glass structure Small-size Medium-size

Metal-Mesh Model

Projective Capacitive touch screen for large display.
The metal mesh structure is ideal for large panels.
Using fine-wire which improve the appearance of metal mesh.
Lineup with 43"w, 46"w, 55"w cover glass (DUS-M) / without cover glass (DUS-XM)
Ideal for large digital signage, marine equipment, vending machines and touch tables.
Capacitive-type Projected-type Multi-touch Metal-Mesh type Gloved-hand operations Large-size

DUS-XF | Thin-Film Model

Film/Film stracture model of Projected Capacitive Touch Screen
ITO Film/Film structure sensor is thin and lightweight.
Cover-glass-less available
A wide ranging product lineup from 7" W to 21.5" W is available for different applications.
Capacitive-type Projected-type Multi-touch ITO type Two-layer glass structure Small-size Medium-size Large-size

DMC can combine and design touch screens according to purpose. Such customization is available for both high- and low-volume production. Finished product images can be seen in the design and development stages.

  • Proposals for individual use environment

    Customers can choose analog/ digital, resistive single-touch/ multi-touch, and capacitive types suitable for individual purposes and environments.

  • Selectable Covering & Surface Finishing

    We offer tempered glass, plate glass and acrylic materials with clear, anti-glare, and fingerprint-resistant processing.

  • Selectable Design & Color

    Touch screen design and color can be selected to match individual customer needs.

  • A wide range of sizes

    We offer a wide range of touch screen sizes for individual business styles and environments.


Developing our own controllers enables us to customize controller FW to satisfy customer preference and optimize for specific use environments. Our wide range of available customization includes noise filtering for use in high noise environments, touch points for use by multiple users, sensitivity adjustment for gloved-hand operations, a palm rejection function for use with stylus pens, and protection against malfunctions caused by water.
  • Noise Filtering Function

    Because capacitive touch screens detect capacitance changes on the screen, they are influenced by noise from the surrounding environment. DMC provides FW noise filter adjustment services in accordance with the noise environment for factories, etc.

  • Adjusting the number of touch points

    The DUS controller handles up to 10 points, including one-touch operation, double-finger zooming, rotating operations, and simultaneous operations by multiple users. It can handle gesture operations such as flicking and zooming, and the number of touch points can be set according to purpose.

  • Sensitivity adjustment for gloved-hand operations

    DMC satisfies customer needs by offering Cover-Glass thicknesses as well as material characteristics and specifications to optimize sensitivity for the environment. Sensitive adjustment allows users to perform touch operations with gloves.

  • Palm rejection function

    The palm rejection function allows users to place their palm on the screen without interfering with operations while using a stylus pen.


Capacitive touch screens are clean, highly light transmittant, highly visible, and realize high quality image display, which make them ideal for a wide range of use environments.. To ensure durability for use by the general public in both commercial and industrial environments, workplaces exposed to direct sunlight, and situations where dust, impact, and water are factors, capacitive touch screen must also meet more exacting standards. Cover-Glasses prevent deterioration of screen appearance due to scratches and dust, and improve weather resistance, cleanability, and cleanliness.
  • Improvement of Durability

    DMC applies 5mm-thick standard or tempered glass to provide touch screens with high resistance against rough handling.

  • Flat Surface

    A Cover-Glass reduces bezel gap and realizes a firm touch to the corners of the screen.

  • Flat surface - Structure

    The flat surface structure features LCD in a casing with a gap between the LCD and touch screen created to accommodate a Cover-Glass.

  • Hard to get dirty and easy to clean

    No infiltration of water or oil. Dirty spots can be wiped off quickly. Easy to take care of.

  • Silk printing is available

    Printing in a wide range of forms available. Color schemes suitable for customers' product color are also available.

  • 06Multi-color printing is available.

    Silk and multi-color printing are available. Custom patterns and logos are also available.

  • 01Acrylic

    Weighing half of what glass does, acrylic is durable and flexible, has high transmittance, and can be cut and drilled.

  • 02Glass

    Glass is less expensive, highly scratch-resistant and is durable. Thicknesses of up to 5mm can be applied.

  • 03Tempered glass

    Tempered glass is three to five times stronger than standard glass, is stronger against scratches, and it offers the highest durability among all clear materials.


Capacitive touch screens are often used for a long period of time outdoor or under direct sunlight for industrial equipment and commercial purposes due to the materials, characteristics, and usage. To prevent the deterioration of appearance caused by scratches and dust on the surface of touch screens under such circumstances, it is recommended the use of protection films.
  • Anti-reflection Film

    Anti-reflection film reduces glare from room- or sunlight, making it ideal for improving screen visibility in environments where such light is unavoidable. The film is coated with material that inverts the phase of exposure light. Reflected light and interfering opposite waves cancel each other out to reduce reflection.

  • Without anti-fingerprint film

    Data input on touch screens can cause deterioration of visibility and appearance due to fingerprints. Application of anti-fingerprint film makes fingerprints less visible and easier to clean off. Ideal for manufacturing sites exposed to oil, and at hospitals and restaurants where hygiene is critical.

  • Without privacy film

    ATMs and other terminals require users to enter personal information or passwords. Privacy film protects against peeking at such information by making the screen visible only when viewed from directly in front.

  • Anti-bacterial Film

    Anti-bacterial film suppresses bacterial growth on the film surface (excluding mold). Ideal for food processing factories handling raw meat and fish, and hospitals and restaurants, where hygiene is critical. The anti-bacterial film has excellent surface hardness and abrasion-resistance against steel wool. It can be applied to any environment and has even anti-bacterial effects on the surface, unlike photocatalyst systems and the agents mixed with anti-bacterial materials.

Hard Coating

Most touch screens can be customized for the use under individual environments with different requirements through surface processing. We offer ideal customization to prevent fingerprints and glare for workplaces such as medical care sites where mistakes are unacceptable.
  • Anti-glare hard coating

    Anti-glare hard coating diffuses and reduces room and sunlight glare on the touch screen. This hard coating improves visibility under sunlight. Creating irregularities on the surface of touch screens and Cover-Glasses diffuses room and sunlight to reduce glare.

Providing solutions for the attachment of touch screens to liquid crystal displays

The attachment of touch screens to liquid crystal displays requires specialized know-how and equipment. DMC offers effective solutions for the attachment of touch screens to liquid crystal displays.
  • Touch screen and liquid crystal sets

    We offer LCD, touch screen, and controller sets as well as semi-customization for bonding. DMC provides high-quality factory-made LCD modules with touch screens.

  • Choice of liquid crystal displays

    We respond to requests for the bonding of DMC touch screens to a wide range of small to large liquid crystal displays from different manufacturers. We are also happy to accept liquid crystal displays provided by the customer.


  • What is air bonding?

    When bonding clear screens or touch screens to liquid crystal displays, a small space is created between the modules. Air bonding technology bonds the two units with double-sided tape to prevent dust and moisture from entering.

  • Ease of implementation

    Although the bonding of touch screen to a liquid crystal display with double-sided tape is a routine procedure, it must be done in a clean room to provide anti-bacterial treatment and prevent dirt and dust.

  • Cost performance

    Air bonding is a simple and cost-effective process using equipment to bond the touch screen to the liquid crystal with double-sided tape. Small-lot production in a clean room does not require equipment for processing.


Please note:
Optical bonding is currently under development. Details may change without advanced notice. If you are considering implementation, please contact our sales department.
  • What is optical bonding?

    Optical bonding is applied to fill the small gaps between the touch screen and liquid crystal module on the display, or liquid crystal module and clear screen using resin (optical elasticity resin).

  • Clear display

    Bonding of a clear screen to a liquid crystal module minimizes the light refractive index to maintain high visibility. It is ideal for images that must be especially bright and information displays in disorderly or bright sites.

  • Reducing reflection

    Bonding of a clear screen to a liquid crystal display with resin reduces the light refractive index generated when the air space and screen are permeated, and prevents reflection on the screen.

  • Increasing durability

    Inserting optical elasticity resin into the air space increases the physical strength of the display surface. Having no gap between liquid crystal display and touch screen prevents damage from foreign matter such as dust and moisture. It is ideal for FA and equipment used by general public.

  • Preventing condensation

    Moisture in the space between liquid crystal and touch screen may cause condensation in environment that experience wide changes in temperature. Filing the air space with resin prevents condensation to ensure good visibility. It is ideal for use in environments that have significant changes in air pressure such as transport vehicles, aircraft, storage spaces, and laboratories.

  • Improved input precision

    The thickness of the touch screen may cause parallax between images on the screen and the actual touch points, which can result in gaps when entering data with the touch pen. Optical bonding allows users to easily confirm and match the touch point with the image, which supports natural touch entry regardless of parallax.

Implementation Procedures

Resistive touch screens are highly versatile and relatively easy to implement. Projected capacitive type touch screens require controller board tuning for panel size, thickness and cover glass material. Consult with us to discuss detailed specifications to ensure the best touch screen and controller for your needs.

  • STEP1

    First, please contact us here.

  • STEP2
    Opinions and ideas

    We would like to learn about customer needs and preferences.

  • STEP3

    We make proposals to satisfy individual customer needs.

  • STEP4

    If the proposals are acceptable, we provide an estimate of the costs.

  • STEP5

    If the estimates are acceptable, we conclude a contract.

  • STEP6

    We manufacture, evaluate, adjust, and mass produce products for delivery.

DMC Support System

  • Development Support
    Product Development
    • Engineers accompany sales staff.
    • Providing development support from the determination of specifications.
    • Taking account of specifications, costs, and material availability.
  • Development Support
    Development of Prototypes
    • Working together to evaluate prototype issues.
    • Revising and improving specifications upon consultation.
    • Making proposals for the ideal touch screens.
  • Supply Support
    Long-term Stable Supply
    • Essential Support during Supply Period.
    • Acquisition of a 50% Japanese market share.
    • Achieving an over 10-year supply.
  • Supply Support
    Res to small-lot production
    • Product lineup to be sold from 1 unit.
    • Providing a wide range of sizes and methods.
    • Customization is acceptable from 1,000 units per year.